Doors and Windows - Gap at bottom of steel security door

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
thaitee
05-20-05, 03:44 AM
I just installed a steel security door...the type which mounts to the outer existing wood frame. I noticed a rather large gap at the bottom. Any ideas on this one?

marksr
05-20-05, 07:07 AM
If it is a pre hung unit it should have a threshold with adjustment screws to raise the threshold to meet the bottom of the door.
thaitee
05-20-05, 02:09 PM
it didn't come with a threshold. i should also point out that this is not a solid steel door, but more of a screen door. i'm thinking i might have to rig something. anyone have any experience with this?

Woodbutcher
05-20-05, 05:40 PM
Hi, You installed a security door that mounts on the door casing or brick mold. The door extends beyond the threshhold of the original door and you have about a 2" gap at the bottom of the door. I have made a form to fit beyond the styles that hold the door up and high as the gap. place the form against the styles hold it in place with a brick or rock. Fill the gap with quick drying mortor. When set remove the form.
Good Luck Woodbutcher