Outdoor Power Equipment and Small Engines - Trouble with Cutting Deck

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Trouble with Cutting Deck

vohr
05-13-05, 03:09 PM
I have a Craftsman 22hp with a 48" cutting deck. All was working well until one blade stopped because of a piece of wood that got caught in it. Now the deck will engage but at a very slow speed - not nearly fast enough to cut. There also is no loud sound that usually occurs when the deck is engaged. The belts seem tight enough though I am no expert. I would appreciate whatever words of wisdom you can offer.

Thanks!

Val :wall:

puey61
05-13-05, 04:07 PM
Although you say the belt "seems" tight, i'd say you burnt it up when the wood got jammed. Yes, the belt may appear tight but the inside (V) of the belt is probably toast whereas it doesn't grab well and just slips. In this case, replacement of such will be in order.
vohr
05-16-05, 09:26 AM
i replaced the primary belt and all is well!

thanks for your help.

val :D