Cleaning and Stain Removal - frosted glass

Help I need advice on how to remove greasy stains from the frosted sid of a frosted glass door

Scrub with soft brush and degreaser,all-purpose cleaner, ammonia/water solution. Rinse and dry. Then, clean with window cleaner to remove streaks.

I would try mixing an optical grade silica around 3.6 micron particle size @99.9% purity with a very strong water miscible solvent such as Safe Strip from Ecolink. Then rinse with pure water. Once removed SEAL IT! If the surface being sealed is inside just use Rain X. If outside another product which uses a crosslinked copolymer resistant to uv is necessary to attain longevity.

Henry Grover Jr.
Glass Tech Consulting
www.xxxxxxxxxxxxx.com/glasstech2001
xxxxxxxxxxxx@xxxxxxxxx.com

Forum Monitors Note:
This post has been edited. Member suspended for advertising. Not Allowed.
Business Web Site(s) and/or Email Addresses are Not Allowed In the forum topics. No Ads, Advertisements and or Links to any personal web site nor any personal business web sites are allow in the forums. Read the "Announcement" in the forum.

Web Site Host & Forums Monitor.

Personal Reminder:
Buckle Up & Drive Safely.
"The Life You Save, May Be Your Own."

You can also wipe glass with solvent cleaner like rubbing alcohol, denatured alcohol, mineral spirits or other to remove grease and oil from glass. As indicated, keeping glass sealed will provide sheeting action and make for easier cleaning and maintenance.