Electronic Alarms and Home Security Devices - Vista 20p turning off paging

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Vista 20p turning off paging

Keebler
04-28-05, 02:50 PM
Ok so I figured out how to turn on paging now but it pages for all the users. I want to turn off paging for select users, please help. :wall:

Vista 20p
6160v
1 motion sensor
All hardwired

Thanks

MrRonFL
04-29-05, 12:30 PM
Assigning Attributes: Master code + [8] + 2-digit user no. + [#] [attribute no.] + value

Attributes: Values
1 = Authority Level 0-4 (see Authority Level table above)
2 = Access Group 0-8 (0 = not assigned to a group)
3 = Active Partition(s) 1, 2, 3 (common)
for this user; Enter partitions consecutively if more than one
and press [#] to end the entries.
4 = RF Zone No. Assigns user number to button type zone for
arm/disarm (keyfob must be enrolled in
system first; see Wireless Key Templates
section).
5 = Open/Close Paging 1 for yes, 0 for no

(From operating instructions section of the installer manual)