Tools, Sharpening and Power Machinery - Screw Gun
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Screw Gun
hawks13
04-18-05, 03:15 PM
I need a screw gun and was debating between the Milwaukee 6742-20 and the Dewalt DW272. Has anyone had any experience with either model and is one considered better than the other? I noticed the Milwaukee had a ball and roller ball bearing system while the Dewalt has a ball and needle bearing system. Is one better than the other? Thanks
GregH
04-18-05, 04:17 PM
hawks13,
My personal preference would be the Milwaukee but if they are in the same price range you would be splitting hairs over which would be best for you.
I think the weight and feel plus the basic features you need should be the deciding factor.
I am not familiar with those models but the last time I looked at drills the Milwaukee seemed to be a little lighter and better balanced but that's just me.
My personal preference would be the Milwaukee but if they are in the same price range you would be splitting hairs over which would be best for you.
I think the weight and feel plus the basic features you need should be the deciding factor.
I am not familiar with those models but the last time I looked at drills the Milwaukee seemed to be a little lighter and better balanced but that's just me.
ampz
04-18-05, 05:06 PM
I prefer Milwaukee over Dewalt.I own a 1/2" corded VSR hammerdrill {its about 15yrs old & still runs like achamp},& a 1/2" 18v hammerdrill{about 2 yrs old}.I epsecially like the reverseable battery feature to allow for more room in tight spaces.
IBM5081
04-18-05, 05:40 PM
I bought the DeWalt screwgun (2500 rpm) refurbed. Works great for driving screws into wood decks, also works for drywall. I already had a Bosch screwgun (4000 rpm) designed for metal studs behind drywall, but I seldom use it.
BTW, you did not mention the application. Slower 2500 rpm for wood works quite well in drywall onto wood studs. The pros will use the trigger lock and let the motor run continuously. Hearing as well as eye protection would be advised.
BTW, you did not mention the application. Slower 2500 rpm for wood works quite well in drywall onto wood studs. The pros will use the trigger lock and let the motor run continuously. Hearing as well as eye protection would be advised.