Plumbing and Piping - Tub Faucet Removal

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Tub Faucet Removal

surfdog
04-09-05, 07:40 PM
I'm trying to remove and replace an old tub faucet. I've read that all you need to do is grab it, turn it counterclockwise and it will screw off. When I do that all it does is spin around. There is a slot underneath the faucet and I think there might be a hex screw there. Could this be holding it in? Thanks for your help.

majakdragon
04-09-05, 08:07 PM
If you are referring to the tub spout, it may have a set screw. Look under the spout and if there is a slot, there is a screw in it. Loosen it and you should be able to remove it. There will also be "O" rings holding it on.. Good Luck.
surfdog
04-09-05, 08:57 PM
Yes, it is the bathtub faucet I'm trying to remove. The screw in the slot looks like it could be a hex screw. Is this possible? Thanks for your time.

majakdragon
04-09-05, 09:03 PM
YUP, most of them are Allen screws. Remove it or at least loosen it most of the way and then pull the spout off. We are always here for your questions.