Electronic Alarms and Home Security Devices - vista 20 with keyfobs

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : vista 20 with keyfobs

kimshow
04-07-05, 09:46 PM
ok ,here is the trick . I am installing a vista 20p for a customer ,we are trting to set up three keyfobs to be used to arm and disarm ,now the question is there a way to program each keyfob to arm,disarm partition 1, arm,disarm partition 2. i have not talked to honeywell yet so i need your opinion if anyone tried that before.

MrRonFL
04-08-05, 05:33 AM
With a 20p, you can certainly assign different keyfobs to different partitions. The details are at the end of the section of the manual concerning zone programming.
kimshow
04-08-05, 08:13 AM
edited by kim.

kimshow
04-08-05, 04:29 PM
Do not worry about ,i figured it out myself.
i assigned zones 49,50 for 21,22 arm & disarm p1,
51,52 for 21,22 arm & disarm partition2.
and on the authority level i had to add zones 49&50 to a user in partion 1
zones 51,52 to a user in partition 2 and give them authority 4.
and this solve the problem.
MrRonFL thanks for your stopping by.