Electronic Alarms and Home Security Devices - Zone 2 Door Window Contact Not Working

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
Amandandme221
04-07-05, 05:41 PM
Just re-programed my 832, and my wireless window contact for my zone 2 is not working. The battery is new, and i think I may have turned off the Zone 2 on the keypad. How can i check and make sure Zone 2 is on. The contact was working before i re-programed it, the battery is new, and the esn# is 100% right, so I think I may have just not activated the Zone 2 area.

NOTE: When all doors and windows are closed the ready light will come on even if that one is open, kind of like it is not programmed, but I think it is. Thanks :wall:

kimshow
04-07-05, 08:40 PM
did you turn 8 on in 102, and did you make sure that 2 is on in 202.
Amandandme221
04-07-05, 08:42 PM
How can I double check (in newbie terms)? Thanks

kimshow
04-08-05, 08:14 PM
*8 installer code 102 and see if 8 is on, 202 and make sure 2 is on.
from 001 did you assign the zone attribute for it,if not 001 after *8 IC and enter zones definitions in sequense 1 to 8.