PDA

View Full Version : Chimney flashing leak


tvshooter
04-03-05, 04:45 PM
During yesterday's heavy rain, I used the opportunity to go up in my crawl-space attic and check for leaks. I found a very minor one where a small amount of water was coming in down the chimney. It appears it is coming in behind the step-flashing. What kind of sealant should I use up there to seal that up? I just purchased some "Gutter and Flashing" sealant for another job, would that work ok for this job?

E. Dodge
04-03-05, 04:50 PM
That might be butyl. Not the best thing to use. They make asphalt based cement in tubes for use in stadard caulking guns.

tvshooter
04-03-05, 05:10 PM
Thanks for the advice. Is there a specific name I should look for when I go to buy it?

pgtek
04-04-05, 10:19 AM
hi
just get osmer cheap black roofing cement in a tube some are call black top other roofing cement.
Wear old close you might get some on you and wear disposal rubber glove.
This thing does make a mess on you

cheers

pg

tvshooter
04-05-05, 09:52 AM
Thank You!!

Ed Imeduc
04-05-05, 10:02 AM
While your up there besure and check on the cement cap on top of the chimney. Lots of time this is where water can get down in and run in the bricks to make it look like its the flashing.

ED ;)