Electronic Alarms and Home Security Devices - Please I need help. I missed up after resetting

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
flik5
04-02-05, 10:42 AM
:alarm: I have ADEMCO Vista20 (hardwired) with a Keypad 6150V and after performing a re-set on the alarm (97*) I have been having trouble with zone 01. This is the enter door and everytime I open the door the keypad displayed "Check" along with a persisting beeping sound. I tryed to bypass the zone but it doesn't allow me to do it either. I am able to arm the system. Please advise.

Thank you.

Desy2820
04-02-05, 04:54 PM
is this a wireless transmitter by any chance? Maybe a low battery in it?

Trying to help!
bluecube
04-02-05, 10:05 PM
By system reset, do you mean you completely defaulted the system? (entered installer programming and exited by pressing *97).

If this is the case, did you then completely reprogram the system to fit your installation(zone type definitions, user codes etc...)

kimshow
04-02-05, 11:15 PM
i think you did not preform the programing section.when you default the system that means it is back to manifacture default and in this case zone 1 is a fire zone so make sure that you program it as entry delay 01 in section 56.