Kitchen Large Electric Appliances - Replacing bearing roller assembly on Maytag dryer
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Replacing bearing roller assembly on Maytag dryer
Laurel1011
02-02-05, 02:26 PM
My Maytag dryer (model #SE7800 - stacked washer/dryer) is 13 years old and has begun making a sound as if an airplane was flying overhead. I spoke to the Maytag Rep and a Parts Rep and both seem to think that the problem could be the bearing roller assembly. Do you concur? I have downloaded a diagram of the tumbler for my model dryer from the Maytag website, but I do not know how to access the bearing roller assembly in order to switch it out. Any assistance would be greatly appreciated.
nomind
02-04-05, 12:36 AM
Hi Laurel,
- i haven't worked on that model, nor can I find a diagram of it. However, many Maytags have bearing rollers under the rear end of the drum. You will need to remove the drum to get at this. :cool:
Do it Right - Do it once.
- i haven't worked on that model, nor can I find a diagram of it. However, many Maytags have bearing rollers under the rear end of the drum. You will need to remove the drum to get at this. :cool:
Do it Right - Do it once.