Electronic Alarms and Home Security Devices - DSC PC3000 Installer's lockout code

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
terryr
01-31-05, 11:55 AM
I could not enter the programming mode so I performed a hardware reset (EEPROMS to factory defaults). This did not help. Apparently the installer enabled the installer's lockout feature at the time of installation which now prevents me from making changes to my system (delay times, bypass zones, etc. Smarthome says there is no way of re-entering the programming mode without the installer's code. What do I do now?

MrRonFL
01-31-05, 04:36 PM
I think that there are a few panel unlocking services, but it would probably cost about as much to simply get another master board. They sell them without the cabinet or other hardware.