Phillips Projection No pitcure

[homerthefoamer]

I have a Phillips 50” big screen model # 9p5544. Watched it last night turned it off went to bed got up turned it on NO PITCURE? When the channel shows on the screen its in blue with a shadow of red. You can hear the sound but no picture. Opened it up and there are no signs of activity like lights or such. The TV is 5 years old and a board was replaced in the first year. Can anyone give me a clue as to what’s going on here? There were no noticeable signs or warning of malfunction. :wall:

[kuhurdler]

so you have a channel # showing on the screen, but no video?

[homerthefoamer]

Ok. Upon close inspection … all three guns seem to be active Red, Blue, And Green and if you look very very close you can see a ghost of the image. But it seem all three colors are independent of one another. Each projecting the same image in they’re own colors slightly overlapping one another? To answer your question the channel does display but in the same way but clearly visible just the three colors are overlapping.

[kuhurdler]

can you plug something into the external A/V inputs and see if it has any picture?