Carpentry and Woodworking - Building a bar

okay this is the first time im actully building a bar into the basement so i decided how i want the look 2 be so i made the frame all around and added 2*3 on it but the probelm is the 2*3 are moving if i touch them they wiggle and im wondering if i add my finsh look or wat ever u wanna call it it will wiggle and i dont want that i think its becase when i put the 2*3 around the concreat flooor it smeeed pretty goood how the screws alll went in so wat is the problem than and how can i prevent this im so lost and i made so much mess so i want to fix this very soon thanks..
this is how i want this to look like


http://www.imagehosting.us/imagehosting/showimg.jpg/?id=168733

any good tips would be great help

What is a 2*3 and where might it be on the bar. How much of the bar have you built?

I am confused by the terminology in your post.

I have to agree with Chris. You're post is very hard to understand what you're trying to ask.

Please post again with some clearer terminology. :confused:

guys
i think his talking about the 2 x 3 he used to fasten the bar to the floor.
he might have tried nailling it to the concret floor and it wabble
if so he should used a power faster or used a hammer drill with tap con nails or grip con srews

cheers

pg

okay let me explain more clearly
how i had the the frame all done was by 2x3 and i had them screwed and nailed on to the concret using my hammer drill. the problem is they wiggle and i notice today that this cant be made because there is nothing on top of them to support it so any ideas on how i should start building the layout and stuff.
i hope this is a bit more clear to understand.