Thoran
01-05-05, 04:31 PM
I'm designing my cart with dual A-Arm suspention, and I made a model out of wood to try it first, so I wouldn't waste steel. I noticed that when I raised the wheel (the amount of travel that the shocks would allow), that the wheel not only went up, but also moved out away from the cart 3/4 to 1 inch. It doesn't seem like much but the other wheel would do the same thing, causing an almost 2 inch spread.
My question is this:
How do you connect the tie rods between the wheel and steering column in a way that allows free movement of the wheels.
The way I look at it now is that if one wheel goes up, it will cause the other to turn out.
My question is this:
How do you connect the tie rods between the wheel and steering column in a way that allows free movement of the wheels.
The way I look at it now is that if one wheel goes up, it will cause the other to turn out.