Electronic Alarms and Home Security Devices - NAPCO 1000 going off sparodically
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : NAPCO 1000 going off sparodically
chunkychi
12-27-04, 12:24 PM
Hello all. Thanks for your advice in advance.
I just moved into a new condo with a NAPCO 1000. The prev owner (original owner) never used the system.
Ever since the power being off in our building a couple of weeks ago, the alarm system would occassionally/sparodically go off. I can simply turn the alarm off by pressing/holding the '9' button to reset it. However, I can't figure out 1. why it is going off and 2. how to make it *stay* off permenantly.
Thank you much.
I just moved into a new condo with a NAPCO 1000. The prev owner (original owner) never used the system.
Ever since the power being off in our building a couple of weeks ago, the alarm system would occassionally/sparodically go off. I can simply turn the alarm off by pressing/holding the '9' button to reset it. However, I can't figure out 1. why it is going off and 2. how to make it *stay* off permenantly.
Thank you much.
MrRonFL
12-27-04, 03:23 PM
Is it going into _alarm_ or is just the keypad sounder making noise. If the latter, the two most likely causes are bad system backup battery, or failure to communicate (if it was once set to be monitored).