Motorcycles, Snowmobiles, Go-Carts, ATV's and Golf Carts - need some help!!
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : need some help!!
Infoneeded
11-14-04, 09:02 AM
--------------------------------------------------------------------------------
I have bought a melex golf cart (model 212) and I am tring to figure out how to put in some switches. I beleave they call them micro switches.
The switches control the cart forward and backward and the other control the cart going on stoppng.
There are two of these switches with a lever attached to them that controls the cart F/R. I am not sure were the wires go on both of these, and the old ones I am not sure they were connected correctly. On the top of them there are three screws, labeled open, common, and closed.
The second set of micro switches that I am tring to install are right behind them. They are attached to a board and when you press the foot pedal a arm goes and clicks on one and when you let go it then presses on the second one. They are also labeled the same way two.
I would greatlyapperciate any one who can give me any or all the informatiion on were the wires go to on both sets of these switches. There are four in all two for the F/R and two for the foot pedal to go and stop. Because I dont have a clue on how t oonstal these at all.
Thank you for your time on my request for some information. Fill free to email me at the below address I have put.
Thanks again,
MH
magicsbest2002@yahoo.com
I have bought a melex golf cart (model 212) and I am tring to figure out how to put in some switches. I beleave they call them micro switches.
The switches control the cart forward and backward and the other control the cart going on stoppng.
There are two of these switches with a lever attached to them that controls the cart F/R. I am not sure were the wires go on both of these, and the old ones I am not sure they were connected correctly. On the top of them there are three screws, labeled open, common, and closed.
The second set of micro switches that I am tring to install are right behind them. They are attached to a board and when you press the foot pedal a arm goes and clicks on one and when you let go it then presses on the second one. They are also labeled the same way two.
I would greatlyapperciate any one who can give me any or all the informatiion on were the wires go to on both sets of these switches. There are four in all two for the F/R and two for the foot pedal to go and stop. Because I dont have a clue on how t oonstal these at all.
Thank you for your time on my request for some information. Fill free to email me at the below address I have put.
Thanks again,
MH
magicsbest2002@yahoo.com