Doors and Windows - non standard door sizes
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : non standard door sizes
beccat73
11-09-04, 11:53 PM
We would like to install bifold doors in the closets in our basement. The problem we are having is finding a proper fit. The one closet is 78 inches high, not to bad except finding a 77in door. The other is in need of serious help; it is only 72in at its lowest point. W bought doors thinking we could trim them down, forgeting the lowest point. But after looking at them I dont think it is possible. Is there any manufactuer that customs makes doors for a reasonable cost? Or any one who can pass on directions for constructing on myself? Any help is appreciated. Thankyou :confused:
Snoonyb
11-10-04, 03:09 AM
As long as you doors do not have a pattern. The 77" will not require the hinge to be moved, the 72" will.
Cut the doors to length. You will find a cardboard honeycomb which you'll have to remove an 1.5" of, cleaning the glue residue from the skin. Then remove the skin from the cut-off and all the residue from the removed bottom piece of the frame. Apply glue the the inside of the skin you had kleaned and insert the removed section of frame, clamp to dry.
Cut the doors to length. You will find a cardboard honeycomb which you'll have to remove an 1.5" of, cleaning the glue residue from the skin. Then remove the skin from the cut-off and all the residue from the removed bottom piece of the frame. Apply glue the the inside of the skin you had kleaned and insert the removed section of frame, clamp to dry.