Lighting, Light Fixtures, Ceiling and Exhaust Fans - Dielectric grease
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Dielectric grease
ZX12R
11-09-04, 06:47 PM
I am going to install outdoor landscape lighting which will be connected using 12 guage wire connected with twist on caps. A friend is telling mt that after i connect the wires using a twist on cap,that i should pack the cap with dielectric grease or silicone(the clear king used for caukink). Another friend is telling me NOT to use dielectric grease as it does not conduct electricity and only prevents moisture.He says if its used,problems will eventually occur. Help!!! Whats the correct product to use when wiring in this manner?
John Nelson
11-09-04, 07:02 PM
After screwing on the cap tightly, seal it up with a bit of 100% silicone caulk.
ZX12R
11-09-04, 07:08 PM
TY John. So,is dielectric grease a no no?
John Nelson
11-09-04, 07:48 PM
Sure you can use dielectric grease if you want.
pcboss
11-10-04, 06:25 PM
There are twist-on wire connectors that are pre-filled with silicone to prevent moisture from affecting the splice. I believe they are made by King.
ZX12R
11-10-04, 06:53 PM
I know pcboss,but they are on the expensive side,so,I fill them myself.