Motorcycles, Snowmobiles, Go-Carts, ATV's and Golf Carts - Yamaha Beartracker 2002 YFM250X valve timing
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Yamaha Beartracker 2002 YFM250X valve timing
HanZi
10-11-04, 02:16 AM
Hi Can anybody help me in finding specs for valve (cam chain) timing on my Yamaha Beartracker?
Chrashed piston by overturning(unbelievable rpmīs) by little kid in first gear.
Replaced and now need to adjust cam timing to get going again.
Please help.
HanZi
Chrashed piston by overturning(unbelievable rpmīs) by little kid in first gear.
Replaced and now need to adjust cam timing to get going again.
Please help.
HanZi
SMcLaughlin
11-23-04, 05:54 AM
HanZi,
If you haven't found your info yet, try your local dealer and see if they can photo copy the cam timing page for you. Usually there are reference markes on the cam that line up with the cylinderhead gasket surface when the piston is at top dead center. I'm not familiar with your Yamaha but if you look closely you should see some sort of timing marks. Let us know what you find. Sean :)
If you haven't found your info yet, try your local dealer and see if they can photo copy the cam timing page for you. Usually there are reference markes on the cam that line up with the cylinderhead gasket surface when the piston is at top dead center. I'm not familiar with your Yamaha but if you look closely you should see some sort of timing marks. Let us know what you find. Sean :)
HanZi
11-23-04, 07:46 AM
Hi
I havent found anything yet. I found the timing marks, 1 on camshaft and 1 on crank. Are they supposed to point towards or away from eachother? Or??
I havent been able to find a local dealer (Iīm in Denmark) that have a hardcopy, and they wont let me have CD copy.
Any help is highly appreciated Soon please. :)
I havent found anything yet. I found the timing marks, 1 on camshaft and 1 on crank. Are they supposed to point towards or away from eachother? Or??
I havent been able to find a local dealer (Iīm in Denmark) that have a hardcopy, and they wont let me have CD copy.
Any help is highly appreciated Soon please. :)