Chevy Hydraulic Clutch

[waterbug]

While recently replacing the starter on my 1990 Chevy 3/4 ton pickup (350 CI 5 speeed manual tranny), I had to remove the clutch slave cylinder. In the process, the hydraulic line cracked. It runs across the firewall behind the engine and down. Does anyone know of a FLEXIBLE replacement line? Local parts store says the rigid line is a dealer part and I don't see how it could be replaced without pulling the engine.
THANKS

[waterbug]

Bit the bullet and bought the hose at the dealer. Eighty bucks for a six foot hose. Went in pretty easy once I figured out that it had to be snaked in from the bottom.