Marine: Boating, Sailing, PWC, GPS and Navigation - '95 OMC Shift Cable
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : '95 OMC Shift Cable
bdstapes
09-11-04, 03:02 PM
Hi,
I have a 19' Four Winns with a '95 OMC Cobra 5.0L. I suddenly had trouble shifting back and forth and found the problem was a broken stopper nut? that is located on the brass portion of the cable near the control arm which keeps the outer cover still while the inner cable travels to the shift housing. It is a little plastic piece shaped like a cylinder which broke cleanly in half.
Is there anyway to replace this piece without changing the whole shift cable, and if not, how hard is it to remove/replace the shift cable? Thanks for any input.
Brett
I have a 19' Four Winns with a '95 OMC Cobra 5.0L. I suddenly had trouble shifting back and forth and found the problem was a broken stopper nut? that is located on the brass portion of the cable near the control arm which keeps the outer cover still while the inner cable travels to the shift housing. It is a little plastic piece shaped like a cylinder which broke cleanly in half.
Is there anyway to replace this piece without changing the whole shift cable, and if not, how hard is it to remove/replace the shift cable? Thanks for any input.
Brett
Ed Imeduc
09-16-04, 11:42 AM
Might try at www.defender.com they have cables and some parts for Teleflex cables.
ED ;)
ED ;)