Electronic Alarms and Home Security Devices - New house and used alarm system
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : New house and used alarm system
aaron10000
09-10-04, 11:55 PM
Hi,
My wife and I just bought a new house. It has a NAPCO keypad and a GEM-P1632 controller. THe problem is that the sellers are in Hong Kong, are unreachable. We don't have any codes to control the alarm system. The other night I somehow screwed it up and set it off. I finally had to pull the battery and AC supply from the wall to shut if off.
Is there a default password or anything I can use to controll this thing.
TIA
-Aaron
My wife and I just bought a new house. It has a NAPCO keypad and a GEM-P1632 controller. THe problem is that the sellers are in Hong Kong, are unreachable. We don't have any codes to control the alarm system. The other night I somehow screwed it up and set it off. I finally had to pull the battery and AC supply from the wall to shut if off.
Is there a default password or anything I can use to controll this thing.
TIA
-Aaron
MrRonFL
09-11-04, 03:44 PM
I don't work with a lot of Napco hardware, but the default dealer/install code is 456789.
You will definitely need to get the manual for this puppy to do anything. The manual/menu layout is not very intuitive. Check with someone like Safewatch.
You will definitely need to get the manual for this puppy to do anything. The manual/menu layout is not very intuitive. Check with someone like Safewatch.