Designing Kitchens and Bathrooms - Can I fit a 46 1/2 Inch tub in a 46 Inch slot?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
holabuster
09-05-04, 02:55 PM
Hey guys, I'm wondering if there was any way I could fit in a tub with 46 1/2 x 27 length and width in a crevice of 46 inch x 28 inch? Can I get each side of the tub sawed off a 1/4 inch? Or maybe some other way? By the way, the company is American Standard and the tub material is Ceramic steel.

http://www.ebuild.com/guide/products/productDetail.asp?catCode=1591&prodID=276013&pageNum=0&recNum=0&sortCode=5&N_540_8=46.5_1&N_1152_8=27_1

Thanks in advance.

Doug Aleshire
09-05-04, 05:21 PM
holabuster,

You need 46 1/2" stud to stud. No way around that fact. Something has to be moved or replace stud locations.

Hope this helps!