Electronic Alarms and Home Security Devices - ademco lynx 5804 keyfob loop l

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : ademco lynx 5804 keyfob loop l

monetjim
09-01-04, 07:09 AM
in setting up my ademco lynx-en alarm, on my ademco 5804 keyfob i can't seem to be able to program the bottom right button, loop number 1, to both turn on an x-10 light AND TURN IT OFF.
i can get it to turn on, OR turn off, but not both. in data field *80 can i use the same zone list for the start zone list and stop zone list? i think i have tried all combinations to get this bottom right hand button, loop 1, to both turn on AND of the x-10 light, and have resorted to having the button just turn it on, and the off (top right button, loop 2) turn it off by using zone type 36, (bell time out or disarming)
i'm pretty sure i'm missing something simple, but i haven't figured out what.

SafeWatch
09-03-04, 09:30 AM
I'll have to research this a little, but from what I remember, you have to have a "light on" button and a "light off" button. But, I may be wrong about that.

I know you can use the same Zone List for Start and Stop, but I don't think that's the way the X-10 works - again, I could be wrong.

I'll do some research and get back.