Electronic Alarms and Home Security Devices - Master Code for GE Simon Control Panel
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Master Code for GE Simon Control Panel
fwashington
08-10-04, 11:07 AM
I moved into a house with a GE Interlogix Simon Control panel was wondering how to get the system to convert back into default settings
Model # 60-693-95R
Model # 60-693-95R
CapeJamz
08-30-04, 09:23 AM
If you sign up for monitoring with anyone, they will come out and reset the codes for you. You're not likely to see anyone give out a master code on line for a whole line of any security product.
Monitoring usually starts at around $29-39 per month.
Good luck.
Monitoring usually starts at around $29-39 per month.
Good luck.
MrRonFL
08-30-04, 03:54 PM
Please check the following thread: http://forum.doityourself.com/showthread.php?t=178565
Safewatch posted the solution earlier last week.
Safewatch posted the solution earlier last week.
SafeWatch
08-30-04, 08:36 PM
Monitoring usually starts at around $29-39 per month
Absolutely not!!! Monitoring <i>starts</i> around $10-15/month. Monitoring <i>tops</i> around $29-39/month - and that's usually with a leased or financed system (like the kind you get from ADT, Brinks, or the "free system" companies.)
To reset the code on a Simon, you'll have to default the entire panel, which means you'll also have to reprogram the system. As Ron said, see the other post which explains the steps in more detail, and provides a link to the manual (which you will need.)
Good luck!
Absolutely not!!! Monitoring <i>starts</i> around $10-15/month. Monitoring <i>tops</i> around $29-39/month - and that's usually with a leased or financed system (like the kind you get from ADT, Brinks, or the "free system" companies.)
To reset the code on a Simon, you'll have to default the entire panel, which means you'll also have to reprogram the system. As Ron said, see the other post which explains the steps in more detail, and provides a link to the manual (which you will need.)
Good luck!