Air Conditioning - How would you pro's fix this evaporator coil box to plenum mismatch?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : How would you pro's fix this evaporator coil box to plenum mismatch?
Letsfixit
08-01-04, 01:50 PM
xxxxxxxxxxxx
Ed Imeduc
08-01-04, 06:03 PM
The 26 Gauge sheet metal should hold it. Id have to ask can you raise the furnace some so they can make a plenum box to fit from the coil box to the furnace say 8 "or 10" high that would sure help here.
ED ;)
ED ;)
Letsfixit
08-03-04, 01:11 PM
xxxxxxxxxxxxxxxxxxxxx
mattison
08-03-04, 01:27 PM
I wouldn't touch it. Call and have the owner come and look at it. The guy sounds inexperienced.
KField
08-03-04, 06:53 PM
I agree that if the job doesn't hold up, it should be repaired by the original contractor for free. I thought that everybody would stand by their work for at least 30 days.
What I have had to do in the past to strengthen a syanding unit was to screw slotted angle vertically to the 4 corners and use them as legs. One way or another you have to get that weight supported properly.
Ken
What I have had to do in the past to strengthen a syanding unit was to screw slotted angle vertically to the 4 corners and use them as legs. One way or another you have to get that weight supported properly.
Ken