Outdoor Power Equipment and Small Engines - Bagger

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Bagger

Nichboy
04-13-04, 08:32 AM
Does anyone know where i might find a bagging setup for a 15 year old front engine 33" snapper rider. I'm mainly looking for the shroud that fits on the deck, i think i can fabricate the rest. Thanks alot

Terminator20
04-13-04, 10:53 AM
Contact your Murray manufacturer and give them your model number and see if they can help you with that. Or you could go to your local small engine repair shop and give them your model number. One of them should be able to direct you to a good bagger for your mower.
puey61
04-13-04, 12:36 PM
You will need to see a Snapper dealer!!! Log on to www.snapper.com and click on dealer locator near the top of the opening page. You will need a model as well as a serial number when you contact a dealer. If no dealer is in your area, give me these #'s and I can help you out.

Terminator20
04-13-04, 12:43 PM
OOPS. I am sorry. I thought you said yours was a Murray. I misread your post. But the rest is the same though.
Nichboy
04-13-04, 12:56 PM
That would be very helpful if i had the part # for the deck shroud. This mower is a model LT 11000 serial# 33144743. Thanks puey61.
puey61
04-13-04, 03:48 PM
The adapter for the deck is part#19912. The kit #'s (complete) are as follows: Standard tranny - 60946, Hydro - 60913. Check with your local supplier for prices and availability. If you choose to fabricate the framework yourself, just don't forget to add the lifts to the blades so that they will push the grass uphill to the bags.