Glass and Mirrors - mirror hinges

hello all what id like to know if is there is someone out there who knows of and where to purchase any kind of hinge that will mount on a 1/4 in mirror . mirror will have no backing and want to use them for cabinet doors. can only find flush mount myself. but want hinges to surface mount

Hello: ilketile

Hinges for all purposes can be found in the above sponsored links. The approved for advertisement sponsor ads appear in that banner on each visit to this forum.

However, the sponsored links change with each page and all rotate. The sponsors and parts vendors ads, above in the links, should have appeared when the forum was opened.

Use the back button to have them reappear, than click the links of choice. This should be the means to locate the parts you want.

More than likely, the glass shop where you'll be purchasing the mirror has them or can order them.

have tried both avenue that were discussed here and still at a loss have been looking for awile. cant find anything made to do the job. have inprovised on one mirror and hung been up for awile with no problems. just would like the real deal. what i did is bought a set of the hinges for flush mounting glass or mirrors. the look like a little c they go ends of glass and have 2 screws to hold in place and they have a pin that protrudes out of top and bottom that you drill hole inside of your opening and put pins in holes

what i did is took clamp and on backside of mirror slide a regular cabinet door hinge underneath tightened screws and then had to saw off protruding part of screw and pin on c clamp. for added strenth i smeared mirror mastic allaround on it\


is working but there has to be something that is right for this project thanks for all help and suggestions

Try this: [URL=http://www.crlaurence.com/ProductPages/G/GDH96BL_8414.html?Origin=