Electronic Alarms and Home Security Devices - Need help Adding auto dailer to amemco via 30+

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
jay209
01-23-04, 04:18 PM
I have an amemco via 30+ and Need help Adding radio shack 49-434 auto dailer don't know where the wires go fron the dialer to the control panel? Thanks Jay
link to the auto dailer Installation


http://support.radioshack.com/support_security/doc60/60691.htm

SafeWatch
01-23-04, 04:47 PM
Basically, you'll just connect the dialer the same way the siren is connected - the positive gets connected to Term 3 and the negative to Term 4. If you want to use the Auxiliary power from the panel (recommended), then connect it to Term 4 (-) and Term 5 (+).

Good luck!