Electronic Alarms and Home Security Devices - Help! Ademco 20P w/ 6160v and 6150

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
vlally
01-06-04, 07:59 PM
I have an error on both my consoles that reads, check 100 rf reciever, what is the problem and how do I clear it. Everything is working good, so I dont understand

SafeWatch
01-06-04, 08:50 PM
Do you have any expansions or wireless receivers connected? The 6150 is not a 6150RF is it? Do you have both keypads addressed correctly and enabled in the system?
vlally
01-06-04, 08:54 PM
I have the 6150 rf which was installed by the installer and the 6160v installed and addressed to 17 by me. The 6150rf is i believe 16. It started after I installed the 5804bd, which is performing correctly.

SafeWatch
01-06-04, 08:59 PM
Ah, you probably programmed the 5804 to the wrong "Input Device Type". It should be "Button type RF transmitter" - 5.

Check that out, I'll bet it fixes it.

Good luck!