Carpentry and Woodworking - Cutting crown molding....
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Cutting crown molding....
JimInFLA
11-15-03, 08:04 AM
For regular molding I set the blade at 45 degress and it makes a perfect right angle.
Unlike regular molding that sits flat against the wall, the crown molding is already at an angle.
My question is how to cut the crown molding to make a 90 turn around a corner.
Using a table saw, the blade is set for 45 degress but not sure at what angle to push the wood through. Any ideas as to what angle the blade should be and at what angle to push the wood?
Unlike regular molding that sits flat against the wall, the crown molding is already at an angle.
My question is how to cut the crown molding to make a 90 turn around a corner.
Using a table saw, the blade is set for 45 degress but not sure at what angle to push the wood through. Any ideas as to what angle the blade should be and at what angle to push the wood?
chfite
11-15-03, 09:32 AM
There is a lot of help at:
www.compoundmiter.com
www.compoundmiter.com