Electronic Alarms and Home Security Devices - Simon III Glass Break problem

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Simon III Glass Break problem

wcornwel
11-04-03, 05:45 AM
I recently installed a Simon III security system. My problem is that I can't get the Glass Break sensors to learn into the system.

Does anyone have any idea? I have six of them and can't get an to work. I've checked the batteries and they are fine. My monitoring company doesn't have any idea.

Any help would be appreciated

Thanks,

William

wcornwel
11-04-03, 06:45 AM
I forgot to list the part numbers.

The sensors are:

60-459-319.5 - ITI Wireless Glass Break Sensor
SafeWatch
11-04-03, 10:09 AM
There's a small jumper inside the Glassbreak that you remove temporarily to learn the sensor in:

<center><a href="http://safewatchservice.com/shared/60-459-319.5-LJ.gif"><img border=0 src="http://safewatchservice.com/shared/60-459-319.5-LJ.gif" width="150"></a><br>Click picture to enlarge</center>

If you need a manual for the glassbreaks - <a href="http://manuals.safewatchservice.com">click here</a>.

Good luck!

wcornwel
11-04-03, 12:44 PM
I've tried removing the jumper fast, slow, and any other way but they refuse to learn into the system. Do you have any ideas or tricks.

I'm at a loss.

Thanks,

William
SafeWatch
11-04-03, 03:01 PM
Well, I just talked to ITI - they say it's not compatible with the Simon3.

Now that I think about it, I don't think I've ever installed one of these glassbreaks with a Simon3 panel - I must not have if it's not compatible.

The only other thing you can do is swap them out for the Shatterpro or Flexguard glassbreaks.
wcornwel
11-05-03, 05:10 AM
Thanks

I guess I need to sell these on ebay now.