Flooring Tile - Grouting bathroom floor
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Grouting bathroom floor
w3webdesign
11-02-03, 05:33 PM
A neighbor helped us install a ceramic tile floor in our small bathroom. I think he mixed the grout too thick, then applied it too heavily. It looks terrible.
What is the best way to fix this problem without damaging the over-glazed smaller decorative tiles? Do I need to remove all the grout and start over? Can I wet-sand with a sanding sponge? Do I need to use a dremel tool?
What is the best way to fix this problem without damaging the over-glazed smaller decorative tiles? Do I need to remove all the grout and start over? Can I wet-sand with a sanding sponge? Do I need to use a dremel tool?
John Bridge
11-06-03, 05:11 PM
Hi,
No sanding. That might scratch up the tiles. You may have to remove all the grout. You can buy a hand tool called a grout saw at Home Depot. Takes a while, but it can be done. Be sure to thank the neighbor. :)
No sanding. That might scratch up the tiles. You may have to remove all the grout. You can buy a hand tool called a grout saw at Home Depot. Takes a while, but it can be done. Be sure to thank the neighbor. :)