Gas and Oil Home Heating Furnaces - Thermostat
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Thermostat
07-18-00, 12:47 PM
I have aHoneywell thermostat and i like to change to a White Rodger but
do not have the wiring diagram it is for heat and cooling can you help
Thank you....Spike
do not have the wiring diagram it is for heat and cooling can you help
Thank you....Spike
07-18-00, 05:41 PM
hello spike im moveing your post to heating and air they r much better qualified to answetr this ?. look for replys there
07-18-00, 09:48 PM
Hi:spikea
Look closely on the back of the new thermostat. You will see tiny letters near the terminals indicating the color of the wire to connect to that terminal.
Example: R=red and Y=yellow
Connect the wires extending out from the wall to the appropriate terminals on the thermostat based on their colors.
Good Luck,
TomBartco
Look closely on the back of the new thermostat. You will see tiny letters near the terminals indicating the color of the wire to connect to that terminal.
Example: R=red and Y=yellow
Connect the wires extending out from the wall to the appropriate terminals on the thermostat based on their colors.
Good Luck,
TomBartco
07-19-00, 06:03 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by TomBartco:
Hi:spikea
Look closely on the back of the new thermostat. You will see tiny letters near the terminals indicating the color of the wire to connect to that terminal.
Example: R=red and Y=yellow
P S I try that but did not work The honeywell has a jumper for the letter R and RH the Rodger do not have the letter RH .Thank you
Connect the wires extending out from the wall to the appropriate terminals on the thermostat based on their colors.
Good Luck,
TomBartco<HR></BLOCKQUOTE>
Hi:spikea
Look closely on the back of the new thermostat. You will see tiny letters near the terminals indicating the color of the wire to connect to that terminal.
Example: R=red and Y=yellow
P S I try that but did not work The honeywell has a jumper for the letter R and RH the Rodger do not have the letter RH .Thank you
Connect the wires extending out from the wall to the appropriate terminals on the thermostat based on their colors.
Good Luck,
TomBartco<HR></BLOCKQUOTE>