Kitchen Gas Appliances - Installation of Dryer Vent through Wall
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Installation of Dryer Vent through Wall
06-05-00, 07:41 PM
I have to install a dryer vent through the wall of my house. I am unsure of how to go about punching a hole through my exterior brick wall to the dryer exhaust pipe.
Any help would be appreciated.
Regards
Any help would be appreciated.
Regards
06-05-00, 08:58 PM
Billy,
Carefully mark where you want to vent to go. Draw a circle on brick (chalk, whatever)just a bit larger than vent. Drill holes through brick wall with masonry bit around perimeter of hole. Chip out with hammer/chisel. Drill/-saw out wall hole. Connect vent pipes. Install outside vent cap (caulk it to brick wall) Should be o.k. Good Luck!
Carefully mark where you want to vent to go. Draw a circle on brick (chalk, whatever)just a bit larger than vent. Drill holes through brick wall with masonry bit around perimeter of hole. Chip out with hammer/chisel. Drill/-saw out wall hole. Connect vent pipes. Install outside vent cap (caulk it to brick wall) Should be o.k. Good Luck!