Bricks, Masonry, Asphalt and Concrete - Mastic on concrete floor

BIG PROBLEM....I was going to install a floor over a concrete floor and have put down the mastic - Acrylpro........Now I have decided to put in a floating floor. The color on the other just wasn't right. I have scraped and sanded until I'm blue in the face...IS THERE AN EASY WAY TO GET THIS MASTIC UP...Your help will be appreciated and it may save my marriage. My wife is ready for the project to be done. Migi

No. Unfortunately, you have to contend with guideline #15 - All the easy ways have been taken.

Scraping and sanding are your best bets. A big paint scraper with the knob handle over the blade is a help.

Thanks so much for your reply...Got to get off the computer and start scraping.
Migi

This may help. Check out Dumond Chemicals ... here is a cut and paste from their site (if it is not too late):

MASTIC PRODUCTS
BLACK MASTIC REMOVER
BLACK MASTIC REMOVER is used for the removal of Black "Cutback" Adhesive which is usually found underneath 9X9 VAT Tile and sometimes under 12X12 Vinyl Composite Tile. This product contains no hazardous citrus or chlorinated solvents. Coverage is 100-150 Sq. feet per gallon.

http://www.safeneasy.com/html/products.htm
Click on the "Other Dumond Products" botton and then scroll down.

Thanks for your reply...........I scraped it all up and the new floor is in...Thanks to everyone for their replys.
Migi