Carpentry and Woodworking - House fro Irrigation Pump

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : House fro Irrigation Pump

colflgg
06-21-03, 02:39 PM
Where can I get some ideas on how to build a house for my irrigation pump. It needs to be roughly 34" long by 24" wide by 20" tall. The current house us falling apart. The pump sits on my dock and I need a house that can be set down over the pump, i.e., it needs an open bottom. I looked at plastic dig houses at Walmart but they have a solid bottom.

chfite
06-21-03, 07:53 PM
Here is a simple dog house plan that might suit.

http://www.woodzone.com/plans/doghouse/doghouse_plans.htm

Hope this helps.
tae
06-22-03, 02:30 AM
couldnt you just cut a hole in the bottom of the plastic to fit?

colflgg
06-23-03, 01:36 PM
Thanks. I think I will be able to modify this and make it work. Will not need the porch and the bottom will be open. Appreciate the help.

Originally posted by chfite
Here is a simple dog house plan that might suit.

http://www.woodzone.com/plans/doghouse/doghouse_plans.htm

Hope this helps.