Entertainment Center: TVs, Stereos, VCRs and DVDs - video game

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : video game

feihin
06-06-03, 07:02 AM
Hello Folks, I recently was adjusting a 25inch video game monitor. While doing this, I bent a component on the video computer board and when bending it back the middle of 3 prongs broke in the middle. The monitor went black and when I touch them together it works fine. I have soldered these games switches before but, not on the monitor. Do you think it will be ok to solder tihs connection. Thanks in advance for your help. Eric

alung
06-06-03, 11:07 AM
Yeah, just put a blob of solder between the broken pins and you're set.

Just don't touch it or move it around thereafter, or you'll probably need to replace it completely.

aaron