Carpentry and Woodworking - wood flower pot
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : wood flower pot
damon76
05-25-03, 10:07 AM
I made a ceder flower pot its 25inches by 10inches and my question is what do I put in it so that water does not rot it?
chfite
05-25-03, 12:34 PM
It needs a drain hole or two. You could seal it with deck sealant or paint it.
Hope htis helps.
Hope htis helps.
SalvageCzar
05-25-03, 01:20 PM
Sealing up the interior with paint or deck sealant is a great idea as is providing weep holes.
Have you decided on the exterior?
Northern White and Western Red Cedar are some one of the most sought-after woods for many outdoor uses. It is a fine grained wood, naturally pitch-free and is durable and resistant to the forces of nature. These qualities combine to make cedar a top choice for all outdoor projects.
Before you start making a choice of finishes, decide what effect you wish to achieve. One of the positive characteristics of cedar is its ability to accept a wide range of finishes. Although it does not require finishing for protection, a properly applied finish will enhance the beauty and life of a cedar piece.
Untreated Cedar: Left untreated, Both Western Red and Northern White Cedar will weather to a beautiful soft silver-gray similar to driftwood. Although untreated cedar is natural and pleasing, it must be understood that wood is a porous material and, over the long term, will need care to minimize surface problems. In many cases where untreated cedar sits in a damp or shaded area, the wood may become discolored with mildew. A 20 percent solution of household bleach in water with one ounce of detergent per gallon will usually remove the stain. After years of exposure, cedar can be refinished to a bright, clean appearance.
Stain Finishing: There are a wide variety of penetrating stains, many of which retain much of the wood's natural color and texture while adding a protective element. Some also can be obtained with water repellant additives and mildew inhibitors. Penetrating stains go into the wood without forming a surface barrier so avoid the problems of blistering and peeling of painted surfaces. They work well on wood with knots and deep surface texture.
Paints: Before deciding to paint cedar, it must be realized that the natural color and grain of the wood will be concealed. If you choose to paint, apply the product according to the manufacturer's directions for the best protection and good service.
Have you decided on the exterior?
Northern White and Western Red Cedar are some one of the most sought-after woods for many outdoor uses. It is a fine grained wood, naturally pitch-free and is durable and resistant to the forces of nature. These qualities combine to make cedar a top choice for all outdoor projects.
Before you start making a choice of finishes, decide what effect you wish to achieve. One of the positive characteristics of cedar is its ability to accept a wide range of finishes. Although it does not require finishing for protection, a properly applied finish will enhance the beauty and life of a cedar piece.
Untreated Cedar: Left untreated, Both Western Red and Northern White Cedar will weather to a beautiful soft silver-gray similar to driftwood. Although untreated cedar is natural and pleasing, it must be understood that wood is a porous material and, over the long term, will need care to minimize surface problems. In many cases where untreated cedar sits in a damp or shaded area, the wood may become discolored with mildew. A 20 percent solution of household bleach in water with one ounce of detergent per gallon will usually remove the stain. After years of exposure, cedar can be refinished to a bright, clean appearance.
Stain Finishing: There are a wide variety of penetrating stains, many of which retain much of the wood's natural color and texture while adding a protective element. Some also can be obtained with water repellant additives and mildew inhibitors. Penetrating stains go into the wood without forming a surface barrier so avoid the problems of blistering and peeling of painted surfaces. They work well on wood with knots and deep surface texture.
Paints: Before deciding to paint cedar, it must be realized that the natural color and grain of the wood will be concealed. If you choose to paint, apply the product according to the manufacturer's directions for the best protection and good service.