Painting - faux painting question......which paints?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : faux painting question......which paints?
STUB
02-21-03, 05:50 PM
I want to do that crackle on my bath trim. Do I need to buy the paints specifically FOR doing faux painting or just the glaze stuff. I found the color paint I want but its a different brand than the stuff used for faux painting. I haven't looked yet but I'm not sure if I will be able to match the color. Also, does it matter if the paints are flat or semi?
Ron
Ron
FloridaSheila
02-21-03, 07:08 PM
Hi--
I have found that clear glaze mixed with craft paints (such as Ceramcoat or Apple Barrel) works well for most faux finishing. A little paint goes a long way. If you have a particular latex color you like, you can also use that, but it's more expensive. Glossy paint can go over flat, but not the other way around. I believe you have to use a different type of glaze for oil-based or alkyd paints. Also, brushes and sponges give different effects when you apply the second (crackle) coat.
Hope this helps!
:)
I have found that clear glaze mixed with craft paints (such as Ceramcoat or Apple Barrel) works well for most faux finishing. A little paint goes a long way. If you have a particular latex color you like, you can also use that, but it's more expensive. Glossy paint can go over flat, but not the other way around. I believe you have to use a different type of glaze for oil-based or alkyd paints. Also, brushes and sponges give different effects when you apply the second (crackle) coat.
Hope this helps!
:)
Fixitswife
02-26-03, 10:52 PM
Ron, If you are wanting to do a crackle finish, you will need to use crackle medium over flat latex paint. It is done in three steps, a base color, crackle medium, then a top finish. The base coat will show through the crackles when finished. Once done, it will need to be sealed with a polyurethane sealer. The sealer will be a MUST since you will have moisture in the bath. I have found that crackle finishing is not very easy to remove so if you ever want to change it, count on spending a lot of time with it.