Home Automation - How to add a remote to a 3-spd. blower motor?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : How to add a remote to a 3-spd. blower motor?
skibum
02-07-03, 03:08 PM
Hi all, I thought I'd post to this group because of your familiarity with remote devices. What I'm trying to do is take a 1/3hp 110vac blower motor and set it up as an ambient air cleaner for my shop. The motor is capable of several speeds by selecting the right wire on the motor. At the highest speed it should pull about 5 amps.This whole unit be mounted in the rafters of the shop. Thus the need for a remote.
What I need is a controller that would let me switch between the speeds(not momentary, and not 2 speeds at the same time). If it can't handle 110vac, then I'd want a controller with 3 24v relays that would have 110vac contacts. Any suggestions? Thanks...
What I need is a controller that would let me switch between the speeds(not momentary, and not 2 speeds at the same time). If it can't handle 110vac, then I'd want a controller with 3 24v relays that would have 110vac contacts. Any suggestions? Thanks...