Decks, Patios, Porches and Docks - Appropriate overhangs?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Appropriate overhangs?

06-28-00, 12:26 PM
My permit requires me to keep 31 feet from the posts of my deck to the property line. Per my design, this cuts into my deck by as much as 3ft (planning on building an 18x11 deck) What sort of overhang/cantelever can I get away with to keep my original design (thereby setting my posts back a bit)? I've got a total of four pairs of 2x10 beams spaced within the 18 ft length. Your thoughts?

06-30-00, 04:08 AM
Most permits and codes will only allow a 2' cantilever, no matter how big your beams are.
I would however, visit with your permit dept and see what they say. They are going to know your trying to beat the system. Good Luck
06-30-00, 05:41 AM
Jack is right -- ask the folks at the bldg. dept. before you start. 2 feet is probably all that they will allow, but it will be their inspector who will be telling you if it's right or wrong. Asking first will save a lot of time, aggrevation, and hard feelings later. <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jack the Contractor:
Most permits and codes will only allow a 2' cantilever, no matter how big your beams are.
I would however, visit with your permit dept and see what they say. They are going to know your trying to beat the system. Good Luck<HR></BLOCKQUOTE>