Entertainment Center: TVs, Stereos, VCRs and DVDs - Panasonic NV-G21 VCR not working
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Panasonic NV-G21 VCR not working
mibrag
01-12-03, 08:33 PM
Hi,
I have a Panasonic VCR model NV-G21 with the following problems:
1. Threading arms are correctly positioned in stop mode, but auxilliary threading arms remain outside the tape area so that tape is not threaded past capstan.
2. Would anyone have tips on adjusting the mode switch which is driven by a gear.
3. When a tape is inserted in the machine, a portion of the tape is threaded against the drum assy by one of the aux threading arms and remains in this position even when the machine attempts to FF or Rew, which it cannot do anyway.
Any suggestions
Regards
Mike
I have a Panasonic VCR model NV-G21 with the following problems:
1. Threading arms are correctly positioned in stop mode, but auxilliary threading arms remain outside the tape area so that tape is not threaded past capstan.
2. Would anyone have tips on adjusting the mode switch which is driven by a gear.
3. When a tape is inserted in the machine, a portion of the tape is threaded against the drum assy by one of the aux threading arms and remains in this position even when the machine attempts to FF or Rew, which it cannot do anyway.
Any suggestions
Regards
Mike