Outdoor Power Equipment and Small Engines - Lawn Tractor Problem
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Lawn Tractor Problem
blair101
10-24-02, 03:36 PM
My John Deere 445 v-twin 22hp electronic fuel injection overhead valves ,K series design 02/98 350 manhours lawntractor, will not start. Parked it running fine, came back a week later and no start. Installed new sparks plugs, and nothing, checked the spark, and no fire. It turns over strong , but no fire. getting gas, but not sure about how strong the flow. , All fuses are good, SO WHY WON"T IT START.>
cheese
10-24-02, 08:48 PM
Hello Blair 101!
That engine is one that I have not gotten familiar with yet. The problem could be somewhere other than the engine though, like in a bad safety switch. Is it in neutral? PTO turned off? full of oil? (there is probably a low-oil sensor that kills ignition if low). Were the spark plugs touching a metal part of the frame when you checked for spark?
That engine is one that I have not gotten familiar with yet. The problem could be somewhere other than the engine though, like in a bad safety switch. Is it in neutral? PTO turned off? full of oil? (there is probably a low-oil sensor that kills ignition if low). Were the spark plugs touching a metal part of the frame when you checked for spark?
lukea
10-28-02, 07:02 PM
More then likely it is a safety switch/contact that is not functioning correctly. There are switches under the seat and on the PTO somewhere. They should be normally closed switches that are easy to check with a multimeter or continuity tester. Good luck.
Luke
Luke
blair101
12-04-02, 07:22 AM
Thank You, the safety switch under the seat was the problem. It apeared to have just corroded, and could not make contact.
cheese
12-05-02, 12:25 AM
Great! I'm glad we could help! :D