I have a peerless WBV3 CTPl boiler with a coil and 3 zone valves. I took out the aqua stor water storage. So now my question is how do I do the wiring between the thermostat - the Honeywell Zone Valves - the thermostat and the Honey well control L7224 A.
I thought that the wiring is like this and pleasre advise me if I am wrong
Yellow lead from V8043E1012 goes to white of thermostat
2nd yellow goes to white of Honey well Transformer 24V40VA
The red thermostat wire goes to black of Transformer
The 2 Red wires (Zone Switch ) go to the T T terminals in the L7224A control box.
I have 3 Zones and no circulator on the zones but the boiler (peerless) has a circulator.
Any help given will be much appreciated.
Thanks in advance.
Tony
