| The arm/disarm code you were originally using was, most likely, the master code. What you obtained was the _installer_ code.
You could have changed the code with the one you had, but the installer code will do the job also.
I suspect that you tried to change the code without exiting program mode with *99, and in the process turned on the RF system type in *22 without having a wireless receiver, and possibly altered other programming elements.
My best advice is to go back into programming with [installer code] + 8 + 0.
Then use the the programming form and the View function (# + location number) to sort out what you may have changed. __________________
"Ask the Right Question..."
- from _The Snow Queen_ by Joan D. Vinge- |