[Fritzy]

I tried the first suggestion again which, as Rick mentioned, connects the VCR and TV with the RCA cables, but it didn't work. The TV does broadcast digital channels, but when the VCR is on, I get snow and a faint "no signal" message on the lower left of the screen. I switched to analog on the TV remote and tuned the tv to channel 4, as I have in the past to use the VCR, but, again, snow and "no signal."

I also tried the second method, which didn't work either. That's the one that doesn't seem to connect the TV and VCR.

The only way I can get the VCR to work is if I connect the cable from the antenna to "antenna in" on the VCR. I connect another cable from "antenna out" on the VCR to the VHF/UHF antenna port on the TV. Then I only get analog.