If you have no glow and current at HSI connections, it sounds like your ignitor is shot anyway, if you indeed tested the right terminals on the board and didn't inadvertantly test LINE terminal. If you tested IGN terminal that has wire to HSI and the neutral to it and you had current there, yet no glow, likely HSI burned out with crack across it. VERY common problem. You can get HSI's for about $20-30.
Just saw your last post at 2:48 and you now say it is up and running now? Yet you said before there was no glow? ??? Is it because you are not able to see good enough where it glows?
Anyway - if you ever have to get and install new HSI, only handle them by the ceramic and not by the rough black brittle coil.