Quote:
Originally Posted by ecman51`  You say nothing about the HSI glowing. If no glow,the click you hear may be coming from ignitoin module sending pulse to send current to HSI. If you do not see it glow, test HSI leads when disconnected, for ohms (preferably under 100, usually about 28 on up) and to see if current is in the 2 wires that come from ignition board or module, to the HSI. If you have no jack to separate for the HSI, then maybe they are plugged directly onto board or module, and you can test there.
IF the HSI DOES glow, still do the ohms test on it in case it is weak. |
I did follow as you suggested. (no glow at all) There was power at the control board where the HSI is connected. I went and dove myself into the burner area. Can't they make it a little more maintenance friendly. I swear, even with my small hands, it was a challanged. I did not want to break my ignitor!